ResMed Sullivan Comfort User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
SULLIVAN Comfort Operating Manual 
18
9
Cleaning and maintenance
You should regularly carry out the cleaning and maintenance described in this
section. These procedures do not require a specialist service organization.
Daily
1 After daily use, wipe the inside and outside of the mask frame and nasal
cushion with a clean, damp cloth.
2 Disconnect the air tubing at the flow generator and hang the tubing and mask
in a clean, dry place until next use.
CAUTION: Do not hang the air tubing in direct sunlight as
the tubing may harden over time and eventually
crack.
3 If using a humidifier, remove the short air tubing between it and the flow
generator after each use. Be particularly careful to disconnect the tubing at
the flow generator end first, to make sure that no water spills down the
tubing and into the flow generator.
4 Clean and maintain the humidifier in accordance with the operating manual
supplied with it.
Weekly
1 Remove the air tubing from the flow generator and from the mask.
Remove the headgear from the mask frame by unthreading the
headgear straps.
Remove the cushion from the mask (but do not disassemble the mask
frame any further).
2 Check that the air outlet vent on the mask frame is not blocked. Remove any
obstruction with a pin or similar object.
3 Wash the mask frame, cushion and air tubing in warm water using a mild
detergent. Rinse thoroughly (particularly the air tubing) and allow to dry.
CAUTION: Do not use bleach or chlorine-based solutions
to clean the cushion, mask or air tubing. These
solutions may cause hardening and reduce the
life of the product.
4 Before next use, refit the cushion to the mask frame. Refit the headgear to
the mask frame. Reconnect the air tubing to the flow generator and mask.
(For detailed instructions see section 3, Preparing for use.)
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments