ResMed S8 User Manual download pdf (Page 5)

3Using the S8 Escape II Auto

English

Using the S8 Escape II Auto

Setting Up the S8 Escape II Auto

1 Connect the power cord to the socket at the rear of the device.

2 Plug the other end of the power cord into the power outlet.

3 Connect one end of the air tubing firmly onto the air outlet.

4 Connect the assembled mask system to the free end of air tubing.

For information on assembling your mask, see your mask manual.

WARNING

• Make sure the power cord and plug or adapter cable are in good

condition and the equipment is not damaged.

• Only ResMed air tubing should be used with the device. A different type

of air tubing may alter the pressure you actually receive, reducing the

effectiveness of your treatment.

• Blocking the hose and/or air inlet of the device while in operation could

lead to overheating of the device.

CAUTION

• Be careful not to place the device where it can be bumped or where

someone is likely to trip over the power cord.

• If you put the device on the floor, make sure the area is free from dust

and clear of bedding, clothes or other objects that could block the air

inlet.

• Make sure the area around the device is dry and clean.

1 2 3 4 5 6 7 8 9 10 ... 18 19

No comments

ResMed S8 User Manual Page 5