ResMed S8 User Manual download pdf (Page 14)

Displays error message:

Exxxx Call Service (where xxxx defines an error)

MOTOR FAULT Call Service or UPLOAD LANGUAGES Call Service

or DATA LOST Call Service

Component failure. Call service.

The following message is displayed on the LCD after you try to update settings

or copy data to the Data Card: Card Error Remove Card

Data Card is not inserted

correctly.

Check that the Data Card is inserted into the Data Card

module with

the arrow facing up, while the S8 Series II is

switched on and not delivering therapy (standby mode).

The Data Card is only partly

inserted.

Ensure that the Data Card is inserted into the Data Card

slot as far as it will go.

You may have removed the Data

Card before settings were copied

to the S8 Series II.

Reinsert the Data Card and wait for the Settings

Success Remove Card message to appear on the LCD.

The card is not a ResScan Data

Card.

Use only a ResScan Data Card.

The following message is displayed on the LCD after you try to update settings

or copy data to the Data Card: Settings Invalid Remove Card

The identification details on the

Data Card do not match the

identification details on your

device.

Contact your clinician immediately.

The following message is displayed on the LCD after you try to update settings

or copy data to the Data Card:

Settings Error Remove Card

There is a data error on the Data

Card.

Contact your clinician immediately.

The following message is NOT displayed on the LCD after you try to update

the settings using the Data Card:

Settings Success Remove Card

The settings were not updated. Contact your clinician immediately.

Problem/Possible Cause Solution

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

No comments

ResMed S8 User Manual Page 14