EnglishH4i™HEATED HUMIDIFIERUser GuideEnglishPatents and designs pending.HumidAire, H4i, ResControl, ResLink, ResTraxx, VPAP, VPAP Auto, AutoSet and S
8TroubleshootingIf there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do n
9Technical SpecificationsEnglishTechnical SpecificationsHumidifier PerformanceThe following settings have been tested at 22°C, 40% RH ambient conditio
10General WarningsA warning alerts you to possible injury. Specific warnings and cautions appear next to the relevant instructions in the manual.• Use
11Limited WarrantyEnglishLimited WarrantyResMed warrants that your ResMed product shall be free from defects in material and workmanship for the perio
ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Indications for use 1Contraind
1IntroductionEnglishIntroductionThe H4i™ is designed to moisten the air delivered to your airway during Positive Airway Pressure (PAP) therapy. Indica
2System Setup1 Align your H4i with your flow generator and push them together until they click into place.2Connect the power cord to the socket on the
3Setting up your H4i for useEnglishFilling the Water Chamber1 Open the cover.2 Remove the water chamber.3 Fill with fresh, clean water up the maximum
4Starting and Stopping TreatmentWarming your H4iThe Warm-Up feature (not available on all ResMed PAP devices) is used to pre-heat the water before sta
5Cleaning and MaintenanceEnglishCleaning and MaintenanceYou should regularly carry out cleaning and maintenance of the water chamber, cover and cover
6WeeklyInspect the water chamber for wear and deterioration. Replace the water chamber if any component has cracked, become cloudy or pitted. Replace
7Cleaning and MaintenanceEnglishReassembling the H4iReassemble the parts when they are clean and dry.1 Align the cover seal to the guides on the cover
Comments to this Manuals