ResMed Positive Airway Pressure Device VPAP IV User Manual download pdf (Page 18)

15Technical Specifications

English

Technical Specifications

Note:

• The manufacturer reserves the right to change these specifications without

notice.

• Pressure may be displayed in cm H

0 or hPa.

Symbols Which Appear On The Device

Caution; Follow instructions for use; Drip proof; Type CF equipment;

Dangerous voltage; Class II equipment; Start/Stop and mask-fit;

Manufacturer.

Operating pressure range 2 to 25 cm H

Maximum single fault steady

state pressure

40 cm H

Pressure measurement

tolerance

±0.5 cm H

O ± 4% of the measured reading

Flow measurement tolerance ±0.1 or 20% of reading, whichever is greater

S, ST and T modes IPAP: 4 to 25 cm H

O (measured at the mask); EPAP: 2 to 25 cm H

(measured at the mask); Pressure Support: 0 to 23 cm H

CPAP mode 4 to 20 cm H

O (measured at the mask)

DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance with ISO 4871:

Sound pressure level 26 dBA with uncertainty of 2 dBA as measured according to

ISO 17510-1: 2002

28 dBA with uncertainty of 2 dBA as measured according to

ISO 17510-1: 2007

Sound power level 36 dBA with uncertainty of 2 dBA as measured according to

ISO 17510-1: 2007

Dimensions (L x W x H) 112 mm x 164 mm x 145 mm

Weight 1.3 kg

Power supply Input range 100–240V, 50–60Hz, 40VA (typical power consumption),

< 100VA (maximum power consumption)

Housing construction Flame retardant engineering thermoplastic

Operating temperature +5

ºC to +35ºC

Operating humidity 10–95% non-condensing

Storage and transport

temperature

-20ºC to +60ºC

Storage and transport humidity 10–95% non-condensing

Operating altitude Sea level to 2,600 m

Electromagnetic compatibility Product complies with all applicable electromagnetic compatibility

requirements (EMC) according to IEC60601-1-2, for residential,

commercial, and light industry environments

Air filter Two-layered, powder-bonded, polyester non-woven fiber

Air tubing Flexible plastic, 1 x 2 m

Air outlet The 22 mm conical air outlet complies with ISO 5356-1

IEC 60601-1 classification Class II (double insulation), Type CF

1 2 ... 13 14 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

ResMed Positive Airway Pressure Device VPAP IV User Manual Page 18

Comments to this Manuals

Related products and manuals for Oxygen Equipment ResMed Positive Airway Pressure Device VPAP IV